Effect of the Photo-initiator System Contained in Universal Adhesives on Radicular Dentin Bonding.

CLINICAL RELEVANCE: The photo-initiator system based on an advanced polymerization system may be an alternative that can be used to overcome the disadvantages of radicular dentin, especially for the apical third. SUMMARY: Objectives: The purpose of this study was to evaluate the effects of universal adhesives with different photo-initiator systems applied in etch-and-rinse (ER) and self-etch (SE) modes on dentin interaction (push-out bond strength [PBS], nanoleakage [NL], and degree of conversion [DC] within the hybrid layer) in the different root thirds after fiber post cementation.Methods and Materials: Roots of endodontically prepared human premolars were randomly divided into six groups according to one of three adhesive systems (Scotchbond Universal [SBU], Ambar Universal [AMB], and Ambar Universal APS [AMB-APS]) and two adhesive strategies (ER and SE) for each system. Posts were cemented, and PBS was tested at 0.5 mm/min. The NL was evaluated by scanning electron microscopy. DC was measured using micro-Raman spectroscopy. The data were analyzed by three-way analysis of variance and Tukey tests (α=0.05).Results: AMB-APS showed similar performance in all root thirds (p>0.05) and higher values of DC, especially in the apical third (p<0.0001). AMB and SBU showed the lowest values in the apical third (p<0.0001).Conclusions: The APS photo-initiator system contained in universal adhesives is a feasible alternative for improving radicular bonding procedure.

Impact of root canal preparation performed by ProTaper Next or Reciproc on the quality of life of patients: a randomized clinical trial.

AIM: To compare the impact of the two different root canal preparation systems on the quality of life of patients and correlate postoperative pain with the impact on quality of life. METHODOLOGY: A randomized clinical trial was conducted with 58 patients allocated into two groups based on the root canal preparation system employed: ProTaper Next (PN) or Reciproc (R). Data collection involved the administration of a questionnaire addressing demographic and clinical characteristics, the OHIP-14 (quality of life) and a visual analog scale (pain). The latter two were the outcomes of interest and were administered in the first 24 h after root canal treatment. The data were submitted to descriptive analysis, bivariate analysis, Poisson univariate and multiple regression, and Spearman's correlation test, with a 5% significance level. RESULTS: A greater frequency of impact after treatment was found for the items 'uncomfortable to eat food' and 'felt self-conscious'. No significant difference between groups was found regarding the severity of impact for total OHIP-14 score or any of the domain scores. CONCLUSIONS: The two root canal preparation systems exerted a similar impact on quality of life. Postoperative pain was correlated with impact on quality of life, affecting chewing function, self-consciousness and stress. Thus, it is important for dentists to provide care capable of preventing or treating the negative consequences of such therapy.

Comparative analyses of ion release, pH and multispecies biofilm formation between conventional and bioactive gutta-percha.

AIM: To analyse the effect of commercial and experimental gutta-percha with the addition of niobium phosphate glass on biofilm formation by oral bacteria from human dental plaque. Additional pH and elemental release of the materials were analysed. METHODOLOGY: The multispecies biofilm was grown anaerobically from plaque bacteria on standardized discs of each material: hydroxyapatite (HA), gutta-percha pellets (OBT) (Obtura pellets, Shoreline, CT, USA), ProTaper gutta-percha (PTP) (ProTaper Universal Gutta-Percha Points, Dentsply Maillefer, Ballaigues, Switzerland), EndoSequence BC gutta-percha (GBC) (Brasseler USA, Savannah, GA, USA), experimental gutta-percha associated with niobium phosphate glass (GNB) and niobium phosphate glass (NPG). Specimens (n = 5 per group and per incubation period) were incubated in brain-heart infusion broth for 3, 14 and 30 days, at 37 °C, and stained using live/dead viability assay. Images were analysed by confocal laser scanning microscopy (CLSM) and the total biovolume (mm3 ), viable bacteria biovolume (mm3 ), and live percentage (%) were quantified. For pH measurement, specimens of each material (n = 3) were immersed in phosphate-buffered saline at 37 °C, and pH was monitored in multiple intervals, up to 30 days. For elemental analysis, additional specimens (n = 3) were immersed in deionized water and elemental release was analysed by ICP-OES (inductively coupled plasma - optical emission spectrometry) at time intervals of 3, 14 and 30 days. Differences between groups were evaluated by the two-way analysis of variation (anova) with Tukey's post hoc test (P < 0.05). RESULTS: The lowest total biovolume at 30 days was found in GNB, GBC and NPG. GNB had the lowest viable bacteria biovolume (mean value) at 30 days (P < 0.05), and the lowest live percentage of bacteria at 3 and 30 days (P < 0.05), whilst NPG had the lowest live percentage at 14 days (P < 0.05). GNB had the highest pH (8.45) after 30 days (P < 0.05), and the greatest Zn and Na release at all time intervals (P < 0.05). Both GBC and GNB had significantly higher Ca release at 14 and 30 days. CONCLUSION: GNB and GBC reduced biofilm formation, GNB had the lowest amount of viable bacteria in biofilms with the highest pH, and high Zn and Na release values after 30 days.

Micropush-out dentine bond strength of a new gutta-percha and niobium phosphate glass composite.

AIM: To characterize an experimental gutta-percha and niobium phosphate glass composite (GNB) applied with a thermoplastic technique to the root canals without sealer in a moist environment and to evaluate its micropush-out bond strength to root canal wall dentine. METHODOLOGY: The root canals of sixty human mandibular pre-molars were prepared using rotary NiTi instruments and irrigation with sodium hypochlorite and EDTA. The teeth were then randomly divided into three groups according to the root filling material used: AH plus sealer and gutta-percha (AH), EndoSequence BC gutta-percha without sealer (GBC), and GNB without sealer. The root canals were filled with a single cone using warm vertical condensation. Push-out bond strengths associated with the filling materials in slices from middle root thirds was determined 30 days after root filling. The failure mode was analyzed with SEM. Analysis using EDX and SEM-EDS was carried out to verify the composition and distribution of the particles of the tested materials. Data were statistically analyzed by one-way anova and Tukey's test (P < 0.05). RESULTS: AH and GNB groups had bond strengths of 2.83 ± 0.64 MPa and 2.68 ± 0.84 MPa, respectively, with no significant difference between them (P > 0.05). The GBC group had the lowest mean bond strength (1.34 ± 0.42 MPa), which was significantly different compared with the other groups (P < 0.05). Cohesive failures prevailed in the AH group, whereas failures were mixed in the GBC and GNB groups. The SEM-EDS analysis on the surface and in the bulk of GBC revealed only a superficial coating of bioceramic particles. Glass particles were detected both on the surface and in the bulk of GNB. CONCLUSIONS: The experimental root filling composite (GNB) had an ability to adhere to root canal wall dentine equal to the current gold standard root filling with gutta-percha and sealer (AH Plus).

Pinpi'n and pinpii'n multilayer devices with voltage controlled optical readout.

In this paper we present results on the optimization of a pinpii'n type a-Si:H based three color detector with voltage controlled spectral sensitivity. The sensor element consists on a glass/ITO/p-i-n a-SiC:H multilayer structure which faces the incident illumination, followed by a-SiC:H(-p)/a-SiC:H(-i)/Si:H(-i')/SiC:H(-n)/ITO heterostructure, that allows the optically addressed readout. Results show that this approach leads to regionally different collection parameters resulting in multispectral photodiodes, coding for red (R), blue (B), and two green (G) components. In the polychromatic operation mode different sensitivity ranges are selected by switching between different biases so that the basic colors can be resolved with a single device. Positive bias is needed under blue irradiation and moderate reverse bias under green. The threshold voltage between green and red sensitivity depends on the thickness of the bottom a-SiC:H (-i) layer, and corresponds to the complete confinement of the absorbed green photons across the pinpi sequence. As the thickness of the a-Si:H i'-layer increases, the self-reverse effect due to the front absorption will be balanced by the decrease of the self-forward effect due to the back absorption shifting the threshold voltage to lower reverse bias. The various design parameters are discussed and supported by a numerical simulation.

Estudo morfo-radiologico do cancer da mama. / Morpho-radiological study of breast cancer

Os autores se reportam ao estudo radiologico do cancer de mama, atraves de levantamento retrospectivo em 383 casos registrados na Unidade de Mastografia do Instituto Nacional de Ginecologia Preventiva e Reproducao Humana Foi avaliada a frequencia dos sinais primarios e secundarios, analisando-se as caracteristicas de cada um pormenorizadamente. Foi verificada a presenca do sinal primario em 90,3% e constatou-se a presenca de opacidade localizada em 78,6% dos casos. Ausencia de qualquer sinal radiologico que justificasse indicacao de biopsia ocorreu apenas em 4,2% dos casos, constituindo os falso-negativos